| Dose | 0.1 to 0.5 mg/kg once a day |
|---|---|
| Usual start | The low end, then adjusted from blood pressure rechecks |
| Tablets | 2.5, 5 and 10 mg |
| Used with | An ACE inhibitor or telmisartan, in most dogs |
| Approval | Not FDA approved for dogs |
| Prescription | Yes |
How to use the amlodipine dosage for dogs calculator
- Enter your dog’s weight from a recent weigh-in, in pounds or kilograms.
- Choose what amlodipine is for, if the calculator asks, and the strength on your label.
- Enter the dose you were told to give (optional) to check it against the usual range.
- Tick any that apply. Some answers stop the result, because a vet needs to decide.
- Read the result: the dose in mg, the amount of your product, and how often.
Amlodipine dosage for dogs chart by weight
From the ACVIM consensus: its drug table lists 0.1 to 0.25 mg/kg once a day, going up to 0.5 mg/kg when needed. Vets start low and adjust from blood pressure readings.
| Dog’s weight | Full range | Tablets that fit | Usual (0.1 to 0.25) |
|---|---|---|---|
| 5 lb (2.3 kg) | 0.23 to 1.1 mg | ask your vet | 0.23 to 0.57 mg |
| 10 lb (4.5 kg) | 0.45 to 2.3 mg | about ½ × 5 mg tablet | 0.45 to 1.1 mg |
| 20 lb (9.1 kg) | 0.91 to 4.5 mg | ½ × 5 mg tablet | 0.91 to 2.3 mg |
| 30 lb (13.6 kg) | 1.4 to 6.8 mg | ½ to 1 × 5 mg tablet | 1.4 to 3.4 mg |
| 50 lb (22.7 kg) | 2.3 to 11 mg | ½ to 2 × 5 mg tablet | 2.3 to 5.7 mg |
| 70 lb (31.8 kg) | 3.2 to 16 mg | ½ to 1½ × 10 mg tablet | 3.2 to 7.9 mg |
| 90 lb (40.8 kg) | 4.1 to 20 mg | ½ to 2 × 10 mg tablet | 4.1 to 10 mg |
Small dogs often need a compounded liquid or a part tablet; your pharmacist can make an accurate strength.
When vets use amlodipine in dogs
In dogs, high blood pressure usually comes with kidney disease and protein loss, so the ACVIM consensus starts with a RAAS inhibitor such as enalapril, benazepril or telmisartan. Amlodipine is added when pressure stays high, and given from the start together with a RAAS inhibitor in severely high readings above 200 mm Hg. The panel advises against amlodipine on its own in dogs, because it can raise pressure inside the kidneys.
How the dose is adjusted
The goal is to bring systolic pressure down into the prehypertensive or normal range, below 160 and ideally under 140 mm Hg, without making the dog weak. Your vet rechecks blood pressure one to two weeks after each change, along with kidney values. Give it once a day at the same time, with or without food.
Amlodipine side effects and warnings
Low blood pressure can cause weakness, wobbliness or fainting; stop and call your vet if you see them. Some dogs develop swollen, overgrown gums over months of treatment, which often improves when the dose is lowered or stopped. Don’t stop amlodipine suddenly in a dog with very high blood pressure without your vet’s advice.
If your dog swallowed extra tablets, call your vet or an animal poison line: ASPCA (888) 426-4435 or Pet Poison Helpline (855) 764-7661 (a fee may apply).
Printable amlodipine dosage for dogs chart
The chart above as an image, to save on your phone or print. Use the calculator at the top of the page for your own dog.

Check readings with the dog blood pressure calculator. See the enalapril dosage for dogs calculator and the benazepril dosage for dogs calculator, and the dog kidney disease stage calculator.
Amlodipine dosage for dogs FAQs
What is the amlodipine dose for dogs?
0.1 to 0.5 mg per kg once a day, according to the ACVIM consensus. Vets usually start near the low end and adjust from blood pressure rechecks.
Can amlodipine be used alone in dogs?
Usually not. The ACVIM consensus advises against amlodipine on its own in dogs and adds it to an ACE inhibitor or telmisartan.
How much amlodipine for a 20 lb dog?
A 20 lb (9 kg) dog has a range of about 0.9 to 4.5 mg; many start around 1 to 2 mg, which may need a compounded liquid or a part tablet.
What are the side effects of amlodipine in dogs?
Weakness or fainting from low blood pressure, and gum overgrowth with long use. Tell your vet about either.